Call Today

321 529 0787

Serving Melbourne and Surrounding Area

According to the Environmental Protection Agency, a family of four typically uses up to 400 gallons of water a day, with 70 percent of this attributed to an indoor use of water. The average American flushes a toilet five times a day. In older homes, with 3.2 gallon toilets, a family of four could use more than 20,000 gallons of water annually just flushing a toilet. For that reason, many municipalities are amending codes to require installation of a 1.28 gallon toilet for new construction or remodels. If you have a plumbing project that requires the installation of a new toilet, the licensed and insured GPS Plumbing professionals can help ensure that you comply with all building codes.

Professional Toilet Repair in Melbourne FL

At GPS Plumbing, we’ve provided comprehensive plumbing services to businesses and homeowners in and around the GPS Plumbing for more than 30 years. We are proud of the skill, training and loyalty of our professional team—all of our plumbers have at least 10 years of experience. Our support staff is highly knowledgeable with more than 30 years of combined plumbing experience. We’ll look at more than your toilet installation in Melbourne—we’ll keep our eyes open for all potential plumbing concerns so that they can be resolved before they cause problems. We are happy to assist you with any plumbing/toilet project, large or small.

Whatever the Toilet, Our Melbourne Toilet Installation Team has You Covered

In general, there are three kinds of toilet flush technology currently in use: siphoning, wash-down, and power-assisted flush. In siphoning toilets, water flows to the rim and from a jet located near the bottom of the bowel. Wash-down toilets use a valve that opens when flushed to allow a flood of water to enter the bowel from under the rim of the toilet. Power-assisted toilets utilize water and compressed air to create a powerful thrust of water to clear waste out of the bowel. In each kind of toilet, however, consideration must be given to the amount of water used. All of our plumbers have experience installing these different type of toilets and you can be sure that when you need toilet installation in Melbourne our team can take care of it.

Which Toilet Makes Sense for Your Home? Our Melbourne Toilet Replacement Pros Can Help Answer That

Each of these toilets has their advantages and drawbacks – siphoning typically uses a lot of water and may sometimes require two flushes; wash-down toilets often stain and require more than one flush, and power-flush toilets can be loud. On the other hand, siphoning toilets are usually very clean and easy to maintain, while power-flush toilets use a gallon or less of water per flush. Our team will always be happy to discuss your options with you and determine what will work best for your needs.

Call Us First When you Need Toilet Installation in Dallas

To arrange a service call with our Melbourne toilet repair team or to install or replace a toilet, or to discuss pricing options, call GPS Plumbers  at 321.698.6104 or contact us by email at We are available 24 hours a day, seven days a week to respond to your call.

CALL NOW (321) 544-9044